Woodwind Mounting System

ATM350W
  • Low-profile design for minimum visibility.
  • Crisp, clear, well-balanced microphone response, even at high SPLs
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • UniMount® woodwind mount attaches securely to any woodwind instrument via a flexible strap, providing excellent shock resistance for the microphone
  • Rugged UniMount® 5" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
  • In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
  • Interchangeable elements available for hypercardioid and omnidirectional polar patterns
  • Included violin mount with hook-and-loop fastener provides an additional mounting option

    ATM350W equipped with adjustable hook-and-loop strap on the woodwind mount allows it to be easily attached just above the bell of the instrument. Specially designed contact points on the base of the mount minimize damping of the instrument’s resonance, while the strap’s rubber pad (opposite the mount) ensures a secure fit. The sturdy 5" gooseneck lets you adjust the proximity of the mic to the bell, as desired.

  • ATM350W Specifications

    Element

    Fixed-change back plate permanently polarized condenser

    Polar Pattern

    Cardioid

    Frequency Response

    40 ~ 20,000 Hz

    Low Frequency Roll-Off

    80 Hz, 12 dB/octave

    Open Circuit Sensitivity

    -49 dB (3.5 mV) re 1V at 1 Pa

    Impedance

    200 Ω

    Maximum Input Sound Level

    159 dB SPL, 1 kHz at 1% T.H.D.

    Dynamic Range (Typical)

    130 dB, 1 kHz at Max SPL

    Signal-To-Noise Ratio

    65 dB, 1 kHz at 1 Pa

    Phantom Power

    11-52V DC, 3.5 mA typical

    Switch

    Flat, roll-off

    Weight

    MICROPHONE : 14.5 g;
    POWER MODULE : 90 g

    Dimensions

    MICROPHONE - 37.8 mm - long, 12.2 mm - diameter POWER MODULE - 92 mm - long, 18.9 mm - diameter

    Output Connector

    Integral 3-pin XLRM-type

    Cable

    4.0 m long (permanently attached to microphone), 3.2 mm diameter, 2-conductor shielded cable with HIROSE HR10-type connector

    Accessories Furnished

    AT8543 power module; AT8491W Uni-Mount® woodwind mount; AT8490 5-inch gooseneck; AT8468 violin mount; protective carrying case

    Download

    audio technica support ATM350a_Manual.pdf - User Manual
    audio technica support ATM350a_brochure-en.pdf - Produce Brochure (Eng)
    audio technica support ATM350a_Brochure-cs.pdf - Produce Brochure (Chinese)