Home / Professional Products / Professional Headphones / Broadcast Stereo Headset with Condenser Microphone (Unterminated) - BPHS2C-UT

Broadcast Stereo Headset with Condenser Microphone (Unterminated)

BPHS2C-UT
  • Low-profile, closed-back, on-ear design provides excellent isolation and fit
  • Proprietary 45 mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils
  • Cardioid condenser microphone with frequency response tailored for commanding, broadcast-ready vocal reproduction
  • Carefully crafted using key metal components for lasting durability
  • Low-impedance design delivers high output level from any headphone output
  • Boom-mounted microphone can be positioned on the left or right side
  • Rigid boom with strong, flexible gooseneck section allows microphone to be adjusted and stay in place
  • Premium, memory foam earpads and headband allow headset to be worn comfortably for hours on end
  • Earpads and headband detach for easy replacement
  • 3.0 m unterminated detachable cable (BPCB3) with TA6F connector at headset




    • BPHS2C-UT Specifications (Headphones)

    Type

    Closed-back Dynamic
    Driver Diameter

    Ø45 mm
    Sensitivity

    102 dB/mW
    Frequency Response

    15 ~ 28,000 Hz
    Maximum Input Power

    1,600 mW
    Magnet

    Neodymium
    Input Connections

    TB6M jack
    Impedance

    38 Ω (312 Ω when limiter switch is on)
    Weight

    240 g (without cord)
    Cable

    BPCB3 (3.0 m / TA6F, Unterminated Connector)
    Accessories Furnished

    Windscreen x 3, Clip, Pouch

    BPHS2C-UT Specifications (Microphone)

    Type

    Back electret condenser
    Polar Pattern

    Cardioid
    Frequency Response

    60 ~ 15,000 Hz (at 2 cm)
    Open Circuit Sensitivity

    -57 dB (5.6 mV) (0 dB = 1V/Pa, 1kHz)
    Maximum Input Sound Level

    140 dB SPL (1 kHz THD 1%)
    Signal-To-Noise Ratio

    60 dB (1 kHz at 1 Pa, A-weighted)
    Dynamic Range (Typical)

    106 dB (1 kHz at Max S.P.L.)
    Phantom Power

    11 to 52V DC, 2 mA
    Dimensions

    Minimum width: 12 mm, Height: 12.7 mm
    Output Connector

    TB6M
    • Social