No description

Cardioid Condenser Microphone

AT4041
  • Smooth, extended frequency response with a slight rise occurring in the high-frequency region
  • Ideal for drum overheads, acoustic guitar, piano, horns and under snare
  • Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • State-of-the-art design and manufacturing techniques ensure compliance with A-T stringent consistency and reliability standards
  • Switchable hi-pass filter and rugged turned-brass microphone housing
  • Custom shock mount provides superior isolation

    This premium electret condenser microphone is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. The AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low reflectivity. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.



  • AT4041 Specifications

    Element

    Fixed-charge back plate, permanently polarized condenser

    Polar Pattern

    Cardioid

    Frequency Response

    20 ~ 20,000 Hz

    Low Frequency Roll-Off

    80 Hz, 12 dB/octave

    Open Circuit Sensitivity

    -36 dB (15.8 mV), re 1V at 1 Pa

    Impedance

    100 Ω

    Maximum Input Sound Level

    145 dB SPL, 1 kHz at 1% T.H.D.

    Dynamic Range (Typical)

    121 dB, 1 kHz at Max SPL

    Signal-To-Noise Ratio

    70 dB, 1 kHz at 1 Pa

    Phantom Power

    48V DC, 3.2 mA typical

    Switch

    Flat, roll-off

    Weight

    120 g

    Dimensions

    21.0mm X 159.5mm(Diameter X Long)

    Output Connector

    Integral 3-pin XLRM-type

    Accessories Furnished

    AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case

    Download

    audio technica support 151_1_AT4041.pdf - Operation Manual