Home / Professional Products / Professional Microphones / Anti-Shock Microphone Stand - AT8668S
No description

Anti-Shock Microphone Stand

AT8668S
  • Anti-shock microphone stand effectively isolate mounted microphones from impact vibration and me-chanical noise normally transmitted from the surface
  • A press switch that controls the microphone with indicater
  • Intended for use with microphones stood on lecterns, pulpits, conference tables and similar surfaces
  • Come with a low reflectance and matte-black finish

    These Audio-technica anti-shock microphone stand effectively isolate mounted microphone from impact vibration and mechanical noise normally transmitted from the surface. They are intended for use with microphones stood on lecterns, pulpits, conference tables and similar surfaces.

    Ideal for use with gooseneck microphones and other quick-mount type microphone using industrial standard XLRM 3-pin type connectors.

    AT8668S MUTE SWITCH

    The At8668S features a press-on/press-off switch that controls the microphone, muting it by 55 dB at 1,000 Hz. The circuitry also operates a light in the switch, powered by the 24-48V phantom source, to indicate when the mic is "on". Regardless of the switch postion, the actual mic operating voltage will be approximately 10-12V less than the phantom source voltage.

    • AT8668S Specifications

    Phantom Power

    24-48V DC, 3 mA typical
    Output Impedance

    360 ohms
    Insertion Loss

    1 dB (150 ohm source, 100k ohm load)
    Mute Attenuation

    55 dB at 1000Hz 35 dB at 100Hz 30 dB at 50Hz (150 ohm source, 100k ohm load)
    Mic Attachment

    XLRF - type, XLRM - type, Switch with LED
    Dimensions

    112mm X 142mm X 40mm (Width X Depth X Height)
    Weight

    1.2 kg

    Download

    audio technica support 269_1_AT8668.pdf - Specification Sheet
    • Social