No description

Hypercardioid Condenser Gooseneck Microphone

ES938aH

No Product Feature ES938aH is a wide-range miniature condenser microphone with a hypercardioid polar pattern. It is designed for quality sound reinforcement, professional recording, elevision and other demanding sound pickup applications. The small diameter double gooseneck design permits highly flexible positioning while maintaining a smooth, wellcontoured appearance. An included snap-on foam windscreen effectively reduces wind noise and “popping.”

The ES938aH is equipped with metallicity for aerospace and UniGuard® RFI-shielding technology, which offers good performance for the voice pickup of asian and outstanding rejection of radio frequency interference (RFI). The microphone is RoHS compliant – free from all substances specified in the EU directive on hazardous substances.

The integral power module can be powered from any external 11V to 52V DC phantom power supply. A recessed switch in the power module permits choice of flat response or low-frequency roll-off (via integral 80 Hz high-pass UniSteep® filter) to help control undesired ambient noise.

  • audio technica ES938aH
  • audio technica ES938aH
  • audio technica ES938aH

ES938aH Specifications

Element
Fixed-charge back plate permanently polarized condenser
Polar Pattern
Hypercardioid
Frequency Response
35-20,000 Hz
Low Frequency Roll-Off
90 Hz, 18 dB/octave
Open Circuit Sensitivity
-37 dB (14.1 mV) re 1V at 1 Pa
Impedance
250 ohms
Maximum Input Sound Level
141 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range (Typical)
112 dB, 1 kHz at Max SPL
Signal-To-Noise Ratio
68 dB, 1 kHz at 1Pa
Switch
Flat, roll-off
Phantom Power Requirements
11-52V DC, 4 mA typical
Weight
135 g
Dimensions
457.2 mm - long, 8.4 mm - head diameter, 18.9 mm - base diameter
Output Connector
Integral 3-pin XLRM-type
Accessories Furnished
AT8109 two-stage foam windscreen

Download

audio technica support 343_1_ES938aH_n.pdf - Operation Manual