Multi-Pattern Condenser Side-Address Microphone

AT4047MP
  • Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
  • Three switchable polar patterns: omnidirectional, cardioid, figure-of-eight
  • Transformer-coupled output and specially tuned element provide sonic characteristics reminiscent of early F.E.T. studio microphone designs
  • Exceptionally low self-noise, wide dynamic range and high SPL capability
  • Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
  • Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
  • Vintage silver-matte finish on microphone and shock mount
  • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
  • Custom shock mount provides superior isolation
  • Integral 80 Hz high-pass filter switch and 10 dB pad switch
  • State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards

    The AT4047MP is a large-diaphragm side-address externally polarized (DC bias) condenser microphone with three switchable polar patterns: omnidirectional, cardioid, and figure-of-eight. It is designed to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement.

    • The omnidirectional polar pattern is sensitive to sound coming from all directions. Select the omni pattern to pick up several voices or instruments on the same microphone, to diminish proximity effect, and to preserve the location’s ambient sound.
    • The cardioid polar pattern is more sensitive to sound originating directly in front of the element, making it useful in controlling feedback, reducing pickup of unwanted sounds and providing isolation between performers.
    • The figure-of-eight polar pattern is more sensitive to sound originating in the front and back of the microphone, rejecting sounds from the sides. It is often used in conjunction with advanced stereo miking techniques.


    • audio technica AT4047MP
  • AT4047MP Specifications

    Element

    Externally-polarized (DC bias) condenser

    Polar Pattern

    Cardioid, Omnidirectional, Figure-of-eight

    Frequency Response

    20 ~ 18,000 Hz

    Low Frequency Roll-Off

    80 Hz, 12 dB/octave

    Open Circuit Sensitivity

    -42 dB (7.9 mV) re 1V at 1 Pa

    Impedance

    100 Ω

    Maximum Input Sound Level

    155 dB SPL, 1 kHz at 1% T.H.D.;
    165 dB SPL, with 10 dB pad (nominal)

    Noise

    14 dB SPL

    Dynamic Range (Typical)

    141 dB, 1 kHz at Max SPL

    Signal-To-Noise Ratio

    80 dB, 1 kHz at 1 Pa

    Phantom Power

    48V DC, 3.4 mA typical

    Switch

    Polar selection; Flat, roll-off; 10 dB pad (nominal)

    Weight

    524 g

    Dimensions

    53.4mm X 188.0mm (Maximum Diameter X Long)

    Output Connector

    Integral 3-pin XLRM-type

    Accessories Furnished

    AT8449/SV shock mount for ⅝”-27 threaded stands; microphone dust cover; protective carrying case

    Download

    audio technica support at4047mp_ss.pdf - Operation Manual