Cardioid Condenser Microphone

AT2035
  • Large diaphragm for smooth, natural sound and low noise
  • High SPL handling and wide dynamic range provide unmatched versatility
  • Custom shock mount provides superior isolation
  • Switchable 80 Hz high-pass filter and 10 dB pad
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

    • audio technica AT2035
  • AT2035 Specifications

    Element

    Fixed-charge back plate, permanently polarized condenser

    Polar Pattern

    Cardioid

    Frequency Response

    20 ~ 20,000 Hz

    Low Frequency Roll-Off

    80 Hz, 12 dB/octave

    Open Circuit Sensitivity

    -33 dB (22.4 mV) re 1V at 1 Pa

    Impedance

    120 Ω

    Maximum Input Sound Level

    148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)

    Noise

    12 dB SPL

    Dynamic Range (Typical)

    136 dB, 1 kHz at Max SPL

    Signal-To-Noise Ratio

    82 dB, 1 kHz at 1 Pa

    Phantom Power

    11-52V DC, 3.8 mA typical

    Switch

    Flat, roll-off; 10 dB pad (nominal)

    Weight

    403 g

    Dimensions

    52mm x 170mm (Maximum Body Diameter x Long)

    Output Connector

    Integral 3-pin XLRM-type

    Accessories Furnished

    AT8458 shock mount for ⅝”-27 threaded stands;
    ⅝”-27 to ⅜”-16 threaded adapter;
    soft protective pouch

    Download

    audio technica support AT2035_UM.pdf - AT2035 User Manual