Multi-pattern Condenser Microphone

AT2050
  • Three switchable polar patterns: omni, cardioid, figure-of-eight
  • Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
  • Switchable 80 Hz high-pass filter and 10 dB pad
  • State-of-the-art surface-mount electronics ensure compliance with A-T'sstringent consistency and reliability standards
  • Dual large diaphragms are gold-vaporized and aged to achieve optimumcharacteristics over years of use

    • audio technica AT2050
  • AT2050 Specifications

    Element

    Externally polarized (DC Bias) condenser

    Polar Pattern

    Cardioid, Omnidirectional, Figure-of-8

    Frequency Response

    20 ~ 20,000 Hz

    Low Frequency Roll-Off

    80 Hz, 12 dB/octave

    Open Circuit Sensitivity

    -42 dB (7.9 mV) re 1V at 1 Pa

    Impedance

    120 Ω

    Maximum Input Sound Level

    149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)

    Noise

    17 dB SPL

    Dynamic Range (Typical)

    132 dB, 1 kHz at Max SPL

    Signal-To-Noise Ratio

    77 dB, 1 kHz at 1 Pa

    Phantom Power

    11-52V DC, 3.8 mA typical

    Switch

    Pattern selection; Flat, roll-off; 10 dB pad (nominal)

    Weight

    412 g

    Dimensions

    52mm x 170mm (Maximum Body Diameter x Long)

    Output Connector

    Integral 3-pin XLRM-type

    Accessories Furnished

    AT8458 shock mount for ⅝”-27 threaded stands;
    ⅝”-27 to ⅜”-16 threaded adapter;
    soft protective pouch

    Download

    audio technica support AT2050_UM.pdf - AT2050 User Manual