Home / Professional Products / Professional Microphones / Anti-Shock Microphone Stand with Switch and LED - AT8688S

Anti-Shock Microphone Stand with Switch and LED

AT8688S
  • Heavy die-cast construction and non-slip bottom pads minimize coupling of surface vibration to the unit.
  • Low-profile design with low-reflectance black finish for minimum visibility.
  • The improved tighter microphone socket for reduce the swing of the microphone.
  • A phantom powered mute switch with a lighted “on” indicator.
  • Newly design switch-off circuit for the mute attenuation level up to 64dB.

    AT8688S anti-shock microphone stand effectively isolate mounted microphone from impact vibration and mechanical noise normally transmitted from the surface. It is intended for use with microphones stood on lecterns, pulpits, conference tables and similar surfaces.

    The AT8688S is ideal for use with gooseneck microphones and other quick-mount type microphone using industrial standard XLRM 3-pin type connectors.

    The AT8688S features a press-on/press-off switch that controls the microphone, muting it by 64 dB. The circuitry also operates a light in the switch, powered by the 24-52V phantom source, to indicate when the mic is “on”.



    • AT8688S Specifications

    Phantom Power

    24-52V DC, 2 mA typical
    Insertion Loss

    1.2 dB (150 ohm source, 100k ohm load)
    Mute Attenuation

    64 dB minimum (150 ohm source, 100k ohm load)
    Mic Attachment

    XLRF - type, XLRM - type, Switch with LED
    Dimensions

    91mm x 132mm x 38mm (Width X Depth X Height)
    Weight

    840 g

    Download

    audio technica support AT8688.pdf - Operation Manual
    • Social