No description

Digital Wireless Systems with UniPak® transmitter

ATW-1101
  • Configuration with ATW-R1100 receiver and ATW-T1001 UniPak® transmitter
  • Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
  • 2.4 GHz range – completely free from TV interference
  • Three levels of diversity assurance: frequency, time, and space
  • Automatic frequency selection for seamless, interference-free operation
  • Extremely easy operation with instantaneous channel selection, sync, and set-up
  • State-of-the-art digital receiver for reliable performance
  • Balanced XLR and unbalanced 1/4” output jacks with level control

    Audio-Technica’s System 10 is a digital high-fidelity wireless system designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display.

    System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.

    Featuring stackable, contemporary styling, ATW-1101 is configured with UniPak® body-pack transmitters designed for use with lavalier, headworn and instrument microphones as well as electric guitars. The system includes the ATW-R1100 receiver and ATW-T1001  body-pack transmitter. The ATW-R1100 is a digital receiver offering volume control along with AF Peak and Pair indicator lights.

    • audio technica ATW-1101
    • audio technica ATW-1101
  • System 10 Overall System Specifications

    Operating Frequencies

    2.4 GHz ISM band

    Dynamic Range (Typical)

    >109 dB (A-weighted)

    Total Harmonic Distortion

    <0.05% typical

    Operating Range

    30 m (100\') typical (Open range environment with no interfering signals)

    Operating Temperature Range

    0° C to +40° C (32° F to 104° F) (Battery performance may be reduced at very low temperatures)

    Frequency Response

    20 ~ 20,000 Hz (Depending on microphone type)

    Sample Rate

    24 bit / 48 kHz

    ATW-R1100 Receiver

    Receiving System

    Diversity (frequency/time/space)

    Maximum Output Level

    Balanced: 0 dBV (XLRM)
    Unbalanced: +6 dBV (6.3mm jack)

    Power Supply

    12V DC, 0.5A with 100~240V AC adapter

    Dimensions

    190.0mm x 46.2mm x 128.5mm (W x H x D)

    Weight

    290 g

    Accessories Furnished

    AC adapter

    ATW-T1001 UniPak® Body-Pack Transmitte

    RF Power Output

    10 mW

    Spurious Emissions

    Following federal and national regulations

    Input Connections

    Four-pin Locking Connector
    Pin 1: GND; Pin 2: INST INPUT;
    Pin 3: MIC INPUT; Pin 4: DC BIAS +9V

    Battery Type

    Two 1.5V AA alkaline

    Battery Current / Life

    >7 hours (depending on battery type and use pattern)

    Dimensions

    70.2mm x 107.0mm x24.9mm (W x H x D)

    Weight

    100 g

    Download

    audio technica support System10_UM_TC.pdf - Installation and Operation (Chinese)
    audio technica support System10_UM_EN.pdf - Installation and Operation