Home / Consumer Products / Microphones / Portable Camera-Mount Digital Wireless Systems - ATW-1701

Portable Camera-Mount Digital Wireless Systems

ATW-1701
  • Digital 24-bit/48 kHz wireless operation for natural sound quality and rock solid performance
  • 2.4 Ghz range – completely free from TV interference
  • Three levels of diversity assurance: frequency, time & space
  • Battery display for transmitter and receiver on the receiver for real time monitoring
  • Receiver operates on Li-Ion battery pack which can be charged via micro-USB input
  • Headphone output with volume control
  • Selectable attenuator: 0dB / -10dB / -20dB
  • Output can be configured as DUAL mono for stereo input of the camera
  • Output can be configured as BALANCED when adapting to XLR balanced line
  • Automatic frequency selection for seamless, interference-free operation
  • Extremely easy operation with instantaneous channel selection, sync, and setup
  • State-of-the-art digital receiver with a sleek and compact design in mind for Pro-sumers to ENG users
  • Included single hot shoe mount for DSLR/Professional Camera/Tripod Stand/Microphone Stand

    Audio-Technica’s System 10 Portable Camera-Mount is a digital wireless system designed to provide rock-solid performance along with easy setup and clear, natural sound quality. Featuring a compact design, System 10 Portable Camera-Mount is available in handheld, lavalier and body-pack configurations. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 portable Camera-Mount offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues.

    System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.

    Each professional Camera-Mount portable digital wireless system includes a receiver and camera shoe mount, and either a bodypack transmitter or a handheld microphone/transmitter. Because System 10 packaging is designed to hold all versions of the system, some compartments in the carton may be intentionally left empty. The ATW-R1700 receiver includes a switching power supply that automatically adapts to changes in mains voltage. The versatile ATW-T1001 UniPak body-pack transmitter has both a high impedance input for instruments, and a low-impedance input with bias connection for use with dynamic and electret condenser microphones. This body-pack transmitters use internal AA batteries and have Power/Mute switches and input Trim (level) adjustments.

    • audio technica ATW-1701

    • System 10 Overall System Specifications

    Operating Frequencies

    2.4 GHz ISM band
    Dynamic Range (Typical)

    >109 dB (A-weighted)
    Total Harmonic Distortion

    <0.05% typical
    Operating Range

    30 m (100') typical (Open range environment with no interfering signals)
    Operating Temperature Range

    0° C to +40° C (32° F to 104° F) (Battery performance may be reduced at very low temperatures)
    Frequency Response

    20 ~ 20,000 Hz (Depending on microphone type)
    Sample Rate

    24 bit / 48 kHz

    ATW-R1700 Receiver

    Receiving System

    Diversity (frequency/time/space)
    Maximum Output Level

    3.5 mm (1/8"), TRS balanced: +6 dBV Dual mono, unbalanced: 0 dBV
    Power Supply

    100-240V AC (50/60 Hz) to 5V DC 0.5A switched mode external USB-type external power supply
    Battery Type

    Internal Battery: 3.7V rechargeable Li-ion battery
    Battery Current / Life

    12 hours
    Battery Charging Time: 4 hours 30 minutes
    Dimensions

    56.0mm x 91.4mm x 27.8mm (W x H x D)
    Weight

    105 g
    Accessories Furnished

    Two antennas; camera shoe mount; AC adapter (USB-type); USB cable; 3.5 mm (1/8") stereo cable

    ATW-T1001 UniPak® Body-Pack Transmitte

    RF Power Output

    10 mW
    Spurious Emissions

    Following federal and national regulations
    Input Connections

    Four-pin Locking Connector
    Pin 1: GND; Pin 2: INST INPUT;
    Pin 3: MIC INPUT; Pin 4: DC BIAS +9V
    Battery Type

    Two 1.5V AA alkaline
    Battery Current / Life

    >7 hours (depending on battery type and use pattern)
    Dimensions

    70.2mm x 107.0mm x24.9mm (W x H x D)
    Weight

    100 g

    Download

    audio technica support ATW-1700_Camera_Mount_OM_ChS.pdf - Operation Manual (Simplified Chinese)
    audio technica support ATW-1700_Camera_Mount_OM_ChT.pdf - Operation Manual (Tranditional Chinese)
    • Social