Home /
Consumer Products /
Microphones /
Stompbox Digital Wireless System - ATW-1501
Stompbox Digital Wireless System
ATW-1501
Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
2.4 GHz range – completely free from TV interference
Three levels of diversity assurance: frequency, time, & space
Two switched TRS balanced 1/4" output jacks
Output mode selector and foot switch to toggle between outputs or mute/unmute Output A without muting Output B (e.g., for use with tuner)
Multi-pairing function to link a single receiver with up to eight body-pack transmitters
Transmitter battery level display on receiver
Automatic frequency selection for seamless, interference-free operation
Extremely easy operation with instantaneous channel selection, sync, and setup
State-of-the-art digital receiver housed in a strong, metal, stompbox-style body for reliable performance and pedal board mounting
Included hook & loop strips for adding receiver to effects pedal board
Audio-Technica's System 10 Stompbox digital high-fidelity guitar wireless system combines the advanced 24-bit operation, easy setup and clear, natural sound quality of other System 10 configurations with unique functionality for guitarists, bassists and other instrumentalists. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 Stompbox offers a rugged, metal, pedal board-mountable receiver with foot switch, two switched TRS balanced 1/4" outputs and an output mode selector. With the tap of a foot, musicians can toggle between outputs (e.g., for switching amps) or mute and unmute one output without muting the other (e.g., for convenient tuning). And a single receiver can be paired with up to eight UniPak® body-pack transmitters, allowing users to easily switch between instruments without having to move a body-pack from one instrument to the next.
System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.
Each Stompbox system includes an ATW-R1500 Stompbox receiver, an ATW-T1001 UniPak body-pack transmitter with an AT-GcW guitar cable, and hook & loop strips for adding receiver to an effects pedal board. The ATW-R1500 is a digital receiver with sturdy, metal-body construction, easy-to-read digital ID and transmitter battery level displays, and AF Peak and Pair indicator lights.
System 10 Overall System Specifications
Operating Frequencies
2.4 GHz ISM band
Dynamic Range (Typical)
>109 dB (A-weighted)
Total Harmonic Distortion
<0.05% typical
Operating Range
30 m (100') typical (Open range environment with no interfering signals)
Operating Temperature Range
0° C to +40° C (32° F to 104° F) (Battery performance may be reduced at very low temperatures)
Frequency Response
20 ~ 20,000 Hz (Depending on microphone type)
Sample Rate
24 bit / 48 kHz
ATW-R1500 Receiver
Receiving System
Diversity (frequency/time/space)
Maximum Output Level
6.3 mm TRS balanced: +12 dBV
Power Supply
100-240V AC (50/60 Hz) to 12V DC 0.5A (center positive) switched mode external power supply
Dimensions
101mm x 44mm x 130mm (W x H x D)
Weight
565 g
Accessories Furnished
Power supply, hook & loop fastener x2
ATW-T1001 UniPak® Body-Pack Transmitte
RF Power Output
10 mW
Spurious Emissions
Following federal and national regulations
Input Connections
Four-pin Locking Connector Pin 1: GND; Pin 2: INST INPUT; Pin 3: MIC INPUT; Pin 4: DC BIAS +9V
Battery Type
Two 1.5V AA alkaline
Battery Current / Life
>7 hours (depending on battery type and use pattern)