Digital Wireless Systems

3000 Digital Series

Digital wireless system equipped with newly unique codec
that can simultaneously operate up to 24 channels

  • High sound quality with Audio-Technica original codec and small latency (2.5ms).
  • Up to 17ch in one 6 MHz channel, and up to 24ch in one 6 MHz channel in HD mode. Available in three frequency bands: DE2 (470–530 MHz) , EE1 (530–590 MHz) and FF1 (606–666 MHz).
  • High RF performance stability with true diversity and error correction technology.
  • Antenna cascading is available up to five receivers.
  • Two audio of receiver can be mixed and output.
  • Available with network connection for Wireless Manager software that allows frequency coordination, device monitoring and real-time field check.
  • 4 digit PIN code and AES256 encryption function to enhance confidentiality.
  • MIC/LINE output switching, -12 to 20 dB can be changed in 1 dB steps.
  • Transmitters and receivers include OLED screens for optimal readout of key settings and alerts.
  • A simple operation is possible with a Ni-MH compatible charger.
  • Lineup of models with Dante output (ATW-DR3120DAN)
  • Handheld transmitter offers extremely low handling noise and includes an industry-standard thread mount for use with six interchangeable A-T microphone capsules.
  • Body-pack transmitter features tactile mute toggle switch (defeatable) for physical confirmation of mute status when transmitter display is not visible.
  • Rugged cH-style connector on body-pack transmitter provides secure connection to lavalier mics, headworn mics, and cables with cH-style screw-down 4-pin connector.




    • audio technica 3000 Digital Series
  • 3000 Digital Series Overall System Specifications

    Operating Frequencies

    Band DE2: 470.125 to 529.975 MHz;
    Band EE1: 530.000 to 589.975 MHz;
    Band FF1: 606.000 to 665.975 MHz

    Minimum Frequency Step

    125 kHz

    Modulation Mode

    π/4-shift DQPSK

    Bandwidth

    192 kHz or lower

    Dynamic Range (Typical)

    ATW-DT3101 Mic input: > 120 dB (A-weighted, typical);
    ATW-DT3101 Inst input: > 108dB (A-weighted, typical);
    ATW-DT3102: > 120 dB (A-weighted, typical)

    Total Harmonic Distortion

    0.1% or less (at 1 kHz, −20 dBFS)

    Latency

    2.5 ms or less (During XLR output)

    Operating Range

    120m (No interfering signals)

    Operating Temperature Range

    -5°C to 40°C

    Frequency Response

    20 ~ 22,000 Hz (Depending on the attached microphone element)

    Simultaneous Use

    Up to 17ch in one 6 MHz TV channel (22ch in one 8 MHz TV channel) with Normal mode
    UP to 24ch in one 6 MHz TV channel (32ch in one 8 MHz TV channel) with HD mode
    (Depending on the radio wave environment and the usage conditions)

    ATW-DR3120 / ATW-DR3120DAN Receiver

    Receiving System

    True diversity

    Image Rejection

    70 dB

    Sensitivity

    -98 dBm (10-5 BER)

    Maximum Output Level

    18 dBV (Line), −12 dBV (Mic)

    Antenna Input

    BNC-type, 50 ohms
    Antenna Power 12V DC, 150 mA (combined)

    Power Supply

    100 ~ 240V AC (50/60 Hz)

    Dimensions

    483 mm × 385 mm × 44 mm (W × D × H)

    Weight

    Approx. 4.1 kg

    Accessories Furnished

    1/2λ whip antenna × 2, power cable, rubber leg × 4

    ATW-DT3101 Body-Pack Transmitter

    RF Power Output

    High: 20 mW, Mid: 10 mW, Low: 2 mW

    Input Connections

    cH-style screw-down 4-pin connector
    Pin 1: GND; Pin 2: INST INPUT;
    Pin 3: MIC INPUT; Pin 4: DC BIAS +5V

    Low Frequency Roll-Off

    80 Hz, 120 Hz, 160 Hz, 12 dB/octave

    Battery Type

    Two alkaline or nickel-metal hydride 1.5 V AA batteries

    Battery Current / Life

    When using nickel-metal hydride 1.5 V AA batteries: Approx. 7 hours (1900 mAh; High), approx. 9 hours (2500 mAh; High)
    When using alkaline 1.5 V AA batteries: Approx. 6 hours (High)

    Dimensions

    64 mm × 23 mm × 82 mm (W × D × H)

    Weight

    Approx. 105 g

    Accessories Furnished

    Pouch

    ATW-DT3102 Handheld Transmitter

    RF Power Output

    High: 20 mW, Mid: 10 mW, Low: 2 mW

    Microphone Element

    Interchangable industry standard thread:
    C510 - Dynamic cardioid
    C710 - Ccondenser cardioid

    Low Frequency Roll-Off

    80 Hz, 120 Hz, 160 Hz, 12 dB/octave

    Battery Type

    Two alkaline or nickel-metal hydride 1.5 V AA batteries

    Battery Current / Life

    When using nickel-metal hydride 1.5 V AA batteries: Approx. 7 hours (1900 mAh; High), approx. 9 hours (2500 mAh; High)
    When using alkaline 1.5 V AA batteries: Approx. 6 hours (High)

    Dimensions

    ATW-DT3102 (without capsule): 193 mm long, 37 mm maximum diameter
    ATW-DT3102/C510: 265 mm long, 54 mm maximum diameter
    ATW-DT3102/C710: 271 mm long, 50 mm maximum diameter

    Weight

    ATW-DT3102 (without capsule): 205 g, without batteries
    ATW-DT3102/C510: 335 g, without batteries
    ATW-DT3102/C710: 319 g, without batteries

    Accessories Furnished

    Pouch, AT8456a Quiet-Flex™ stand clamp

    Download

    audio technica support 3000DSeries_QSG.pdf - 3000 Digital Series Quick Start Guide
    audio technica support Wireless3000D_UM_EN.pdf - 3000 Digital Series User Manual
    audio technica support Wireless3000D_UM_TC.pdf - 3000 Digital Series User Manual (Chinese)
    audio technica support WirelessManagerInstaller_v1.2.0_64bit.exe.zip - Wireless Manager (windows 64bit)
    audio technica support WirelessManagerInstaller_v1.2.0.dmg.zip - Wireless Manager (Mac version)
    audio technica support WirelessManager.pdf - Wireless Manager User Manual
    audio technica support Wireless3000Digital.dwg - 3000 Digital Series Appearance (DWG)
    audio technica support Wireless3000Digital.pdf - 3000 Digital Series Appearance (PDF)