Home / Professional Products / Professional Microphones / Cardioid Condenser Side-Address Microphone - AT4033a

Cardioid Condenser Side-Address Microphone

AT4033a
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
  • The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use
  • Floating-construction capsule assembly provides isolation from noise and vibration
  • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
  • State-of-the-art surface-mount electronics ensure compliance with A-T stringent consistency and reliability standards
  • Custom shock mount provides superior isolation




    • AT4033a Specifications

    Element

    Fixed-charge back plate, permanently polarized condenser
    Polar Pattern

    Cardioid
    Frequency Response

    30 ~ 20,000 Hz
    Low Frequency Roll-Off

    80 Hz, 12 dB/octave
    Open Circuit Sensitivity

    -32 dB (25.1 mV) (0 dB = 1 V/Pa, 1 kHz)
    Impedance

    100 Ω
    Maximum Input Sound Level

    145 dB SPL (1 kHz at 1% THD)
    155 dB SPL (When pad is on.)
    Noise

    17 dB SPL (A-weighted)
    Dynamic Range (Typical)

    128 dB (1 kHz at Max SPL)
    Signal-To-Noise Ratio

    77 dB, 1 kHz at 1 Pa, A-weighted
    Phantom Power

    48V DC, 3.2 mA typical
    Switch

    Low cut : on/off, Pad : on/off
    Weight

    380 g
    Dimensions

    53.4mm X 170.0mm (Diameter X Long)
    Output Connector

    Integral 3-pin XLRM-type
    Accessories Furnished

    AT8449a shock mount, stand adapter 3/8”-5/8”), microphone dust cover, carry case

    Download

    audio technica support AT4033a s-2.pdf - User Manual
    • Social